 |
Brother ScanNCut Roll Feeder Design Collection 1 | CADXRFDP01
Product Code : CADXRFDP01
£22.90
Save £4.59 Was £27.49
Information for Brother ScanNCut Roll Feeder Design Collection 1 | CADXRFDP01
Brother ScanNCut Roll Feeder Design Collection 1 | CADXRFDP01 Information
Create lovely decals for your wall with the 2 collections in this content card.
- 29 designs in total
- Friends of the Forest design set
- Aquarium design set
- A roll feeder is necessary to cut these patterns. Roll feeder sold separately.
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
Suitable For Brother cutting machines ScanNCut:
SDX2240D, SDX2250D, SDXTL, SDX1200, SDX900, SDX135.
Please Note: We offer no refunds once an activation code has been sent.
Writing guidelines
SIMILAR PRODUCTS YOU MAY ALSO LIKE
- Reverse it – now you can use reverse rolled, as well as forward rolled materials on your Roll Feeder II, such as heat transfer vinyl.
- In the thick of it – you can now cut materials from 0.15 mm up to 0.5 mm thick on the roll feeder II (roll feeder I range 0.21 mm – 0.35 mm).
- Easier feed for reverse rolled and more delicate materials with the included Leader Sheet.
- Compatible with ScanNCut DX range only – please check Brother Solutions Center for compatibility.
- For use with ScanNCut DX Roll Feeder (Roll Feeder not included).
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 24 design patterns
- For use with Roll Feeder
- 25 Designs
- For best results, use the Vinyl Auto blade
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- Place at the edge of your rolled material before loading into your ScanNCut DX when using the roll feeder.
- Provides support and tension to weaker materials, ensuring a better cut.
- Ensures reverse rolled materials feed properly from the Roll Feeder II into your ScanNCut, reducing the risk of miscuts and jams.
- Compatible with Roll Feeder II only.
Brother ScanNCut Disney Alice in Wonderland | Design Collection | CADSNP09
£29.65
Save £3.34
Was £32.99
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 31 design patterns
- Includes: Activation card for PigPong Lettering Collection
- Includes 3 sets of letters and 108 designs in collection
- Included designs are for personal use only and may not be used for resale.
- All designs are created by Japanese designer, pigpong, Yoko Ganaha.
- Unlimited use
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 100 design patterns
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- Calligraphy Font Collection (2 Fonts)
Brother ScanNCut Disney Mickey & Minnie Mouse | Design Collection | CADSNP10
£31.99
Save £1.00
Was £32.99
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 45 design patterns
- Ideal for securely and evenly fastening material to your cutting mat.
- It also excels at burnishing materials, such as adhesive craft vinyl, onto smooth surfaces.
- Dimensions: 102mm / 4 inches.
- This versatile tool allows you to effortlessly remove cutouts from your cutting mat or apply cut designs to smooth surfaces, ensuring they are firmly secured.
- It is a perfect complement to the Brother Spatula and Hook set.
- 100mm/3.9"wide.
Brother ScanNCut Disney Frozen Ⅱ | Design Collection for Vinyl Auto Blade | CADXDSNP11
£29.65
Save £3.34
Was £32.99
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 36 design patterns
Brother ScanNCut Disney Mickey & Friends | Appliqué Collection | CADSNP03
£29.65
Save £3.34
Was £32.99
- 33 design patterns
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 27 design patterns
- Size: 12 x 9.5" (305 x 241mm)
- Require embossing tool set to use line embossing
- For region embossing, activated Embossing Function on your ScanNCut is needed (extra purchase)
- This mat ensures precise cutting of thin fabrics when used with the Thin Auto Fabric Blade.
- It is specifically designed for thin fabrics and materials requiring a stronger adhesive mat.
- The mat measures 12 x 12 inches (305 x 305 mm) and is compatible with Brother ScanNCut DX machines.
- The Universal Pen Holder enhances creative flexibility when using ScanNCut machines.
- It accommodates most pens and writing instruments.
- Which will allow you to draw on a variety of surfaces, including paper, fabric, and other mediums
Brother ScanNCut Disney Mickey & Friends | Paper Craft Collection | CADSNP01
£29.65
Save £3.34
Was £32.99
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 20 design patterns
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- 33 design patterns
CUSTOMERS ALSO BOUGHT COMPLETE YOUR SELECTION
- Set of 2
- For best results, use with the Foil Transfer Starter Kit itemCAFTKIT1, sold separately
- For use with Brother cutting machines
- Enhanced Image tracing allows you to trace cutting data in images where the area to be cut is unclear. Making it even easier to use than the Canvas normal tracing function.
- 25 designs included
- NOTE: The Image tracing function is the same in both Premium packs 1 & 2. Only the pattern designs are different.
- For use with free CanvasWorkspace account
- 28 designs
- Included designs are for personal use only and may not be used for resale.
- All designs are created by Japanese designer, Pig Pong, Yoko Ganaha.
- A free Canvas Workspace account and internet connection are necessary to unlock the designs
- Included items:Paper piercing tool x 2 (0.4 mm/0.8 mm each)Paper piercing tool holder x 1Paper piercing mat x 1Activation card x 1Test Card (5” x 7”) x 1Envelope (5.2” x 7.2”) x 1Contents in activation: 30 patterns
- Only for SDX range
- A free CanvasWorkspace account and internet connection are necessary to unlock the designs
- Fully automatic blade – no need to adjust pressure or blade depth.
- This cutting blade is suitable for a wide range of fabric and paper.
- Designed for use with the ScanNCut DX Auto Blade Holder (Blade Holder not included).
- Mat cutting area 11.7 inch X 11.7 inch (297.18mm X 297.18mm).
- Ideal for felt, denim, lycra, and quilt blocks.
- Reusable high tack fabric support sheets.
- Replacement blade for the Vinyl Auto Blade.
- Cuts a variety of vinyl, stencil, and heat transfer materials.
- Fully automatic blade, eliminating the need to adjust pressure or blade depth.
- Designed for use with the ScanNCut DX Vinyl Auto Blade Holder (Blade Holder not included).
- Specifically designed for delicate or thin paper, such as printer paper or vellum (0.1 - 0.3 mm thick), capable of cutting up to 12" x 12" (305 x 305 mm).
- Cutting Mat size: 12" x 12" (305 x 305 mm).
- Compatible with Brother ScanNCut DX machines.
- Available in a 3-pack.
- Fully automatic blade – no need to adjust pressure or blade depth.
- This cutting blade is suitable for a wide range of fabric and paper, with thicknesses ranging from 0.1 to 3 mm, depending on the material.
- Designed for use with the ScanNCut DX Auto Blade Holder (Blade Holder not included).
- This mat ensures precise cutting of thin fabrics when used with the Thin Auto Fabric Blade.
- It is specifically designed for thin fabrics and materials requiring a stronger adhesive mat.
- The mat measures 12 x 12 inches (305 x 305 mm) and is compatible with Brother ScanNCut DX machines.
- The scan mat ensures excellent scan quality.
- Scanning area: 305 mm x 305 mm (12" x 12").
- Not intended for cutting.
- Compatible with Brother ScanNCut DX SDX machines.
- Fully automatic blade—no need to adjust pressure or blade depth
- Specially made for thin fabric without backing
- For use with the ScanNCut Thin Fabric Auto Blade (blade not included)
- Specially designed for delicate or thin paper, like printer paper or vellum, with a thickness ranging from 0.1 to 0.3 mm.
- Can cut materials up to 12 x 12 inches (305 x 305 mm).
- Mat size is 12 x 12 inches (305 x 305 mm).
- Compatible with Brother ScanNCut DX machines.
Brother ScanNCut Standard Tack Adhesive Mat 12 x 12 Inch | CADXMATSTD12
£19.00
Save £2.99
Was £21.99
- Cutting mat size: 12" x 12" / 305 x 305 mm.
- Compatible with Brother ScanNCut DX machines.
- Designed to be ironed onto the back of fabric, allowing it to be used as appliqué pieces.
- One sheet measures 914 x 470 mm.
Add To Basket
